Rentals

The Mustang 2500RT NXT3 Track Loader was designed from the ground up to be the top performing machine on the job site. The extra-large, state-of-the art operator’s station on the new 2500RT NXT3 Track Loader is designed for optimal operator comfort resulting in all-day productivity on the job site.

Controls on the 2500RT NXT3 Track Loaders are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility. The Mustang 2500RT NXT3 Track Loader engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.

The Mustang 2500RT NXT3 Track Loader hydraulic system is engineered to push more material, lift heavier loads and power demanding attachments. The robust lift-arm on the 2500RT NXT3 Track Loader is designed for optimal strength, visibility and capacity.

Serviceability is very important to our customers. The 2500RT NXT3 is sure to exceed your service expectations.

Key Features
Overall Operating Height - Fully Raised (mm): 175.2” (4450)
Height to Hinge Pin - Fully Raised (mm): 128” (3251)
Reach - Fully Raised (mm): 39.2” (996)
Dump Angle - Fully Raised: 41°
Dump Height - Fully Raised (mm): 98” (2489)
Maximum Rollback Angle - Fully Raised: 102.5°
Overall Height at ROPS (mm): 83.1” (2111)
Overall Length with Bucket - Standard Counterweight (mm): 157.8” (4008)
Overall Length without Bucket - Standard Counterweight (mm): 126.8” (3221)
Specified Height (mm): 67.7” (1720)
Reach at Specified Height (mm): 31.3” (795)
Dump Angle at Specified Height: 75°
Maximum Rollback Angle at Ground: 30°
Carry Position (mm): 8.2” (208)
Maximum Rollback Angle at Carry Position: 31.6°
Digging Position - Below Ground (mm): +0.5” (13)
Angle of Departure with Standard Counterweight: 25°
Ground Clearance (mm): 13.2” (335)
Track Gauge (mm): 51.7” (1313)
Track Shoe Width (mm): 17.7” (450)
Crawler Base (mm): 61.5” (1562)
Overall Width - Less Bucket (mm): 69.5” (1765)
Bucket Width (mm): 83.9” (2131)
Clearance Radius - Front with Bucket (mm): 98.4” (2499)
Clearance Radius - Rear with Standard Counterweight (mm): 70.7” (1796)
Maximum Rollback at Specified Height: 66.8°
Angle of Approach: 90°
Grouser Height (mm): 1” (25)

Capacity
Operating Capacity at 35% of Tipping Load (kg): 2,500 lbs. (1134)
Operating Capacity at 50% of Tipping Load (kg): 3,571 lbs. (1620)
Tipping Load (kg): 7,143 lbs. (3240)
Operating Weight (kg): 11,470 lbs. (5203)

Engine
Make/Model: Deutz/TD 3.6 Tier 4
Type: 4-Stroke Turbo
Displacement (L): 221 cu.in. (3.6)
Cylinders: 4
Gross Horsepower (kW) @ 2300 rpm: 74.3 hp (55.4)
Peak Torque (Nm) @ 1500 rpm: 243 ft-lbs. (330)
Oil Pump Capacity (L): 9 qts. (8.5)
Alternator Voltage/Amperage: 14V/95A

Track Drives
Drawbar Pull / Tractive Effort (kN): 12,770 lbs. (5792)
Track Type: Rubber
Track Rollers: 5
Roller Type: Steel
Track Width (mm): 17.7” (450)
Ground Pressure (bar): 5.3 psi (0.37)

Forces
Bucket Breakout - Tilt Cylinder (kg): 8,384 lbs. (3803)
Bucket Breakout - Lift Cylinder (kg): 7,437 lbs. (3373)
Ground Speed - Single Speed (km/hr): 5.8 mph (9.3)
Ground Speed - Two Speed (km/hr): 8.2 mph (13.2)

Volume
Fuel Tank (L): 24 gal. (91)
Hydraulic Reservoir Tank (L): 13.8 gal. (52.2)
Coolant Capacity (L): 5.1 gal. (19.3)

Hydraulics
Auxiliary Hydraulic Flow - Rated Speed (L/min): 24.9 gpm (94.3)
High-Flow Hydraulic Flow - Rated Speed (L/min): 37.4 gpm (141.6)
Transmission Pump Type: Axial Piston

Motor Type: Axial Piston with Planetary Reduction