2015 Mustang 1900R Skid Steer
Winter Promo: $1450/month
based on a 5-month contract.
Get 1 month FREE!
Ask to Rent this Product
If you are intersted in renting this product, please fill out and submit the form below.
Offers enhanced performance in excavating, grading and digging below grade applications. Due to the radial lift path, the maximum reach is greater at the middle of the lift height.
Providing more reach at full lift height is optimal for applications that require loading and stacking at high heights. By keeping the load closer to the machine, lift capacities are increased over radial-lift models.
SINGLE PLANE LIFT ARM
Design features large diameter pins aligned in a single plane for best-in-class vertical and lateral strength and rigidity.
SINGLE PIN DESIGN
Provides superior durability in loading and pushing applications.
Up to 4.5'' (114 mm) width lift arm construction delivers superior strength and rigidity.
EXCELLENT FORWARD REACH
The Mustang radial lift skid steer loaders provide excellent forward reach at the middle of the lift path. This provides excellent performance for loading flatbed trucks, backfilling or dumping over a wall.
The 4000V has a true vertical lift path. The 2700V NXT2 and 3300V NXT2 have a near vertical path.
Upper-rear channel support welded to the top and between the load arms provides added rigidity without obstructing rear visibility.
- Load capacity of 1,900 lbs. and 2,110 lbs. with optional counterweight kit
- Lift height of 120.5"
- 69.3-hp Yanmar Tier IV diesel engine
- Radial-lift arm design
- Fast ground speeds up to 12.5 mph with two-speed option
- Operator-friendly Level II-certified ROPS/FOPS
- Spacious operator compartment gives operators more comfort and excellent visibility
- Auxiliary hydraulics of 18.5 gpm
- Optional high-flow auxiliary hydraulics up to 31.5 gpm
- Drive motors utilize SAHR (spring-applied, hydraulic-release) brakes as standard equipment
- Safety Interlock system requires operator to be seated with restraint bar down prior to operation
- Tilt-up ROPS for easy internal service access
- Joystick Controls
- Hand-Foot Controls
Attachment Mounting System
- The Multi-tach™ mounting system offers compatible fit-up with most attachments
Joystick Controls: Optional
Hand-Foot Controls: Optional
Engine Auto-Shutdown System: Standard
Engine Block Heater: Optional
Tier IV Engine: Standard
Auxiliary Hydraulics: Standard
High-Flow Auxiliary Hydraulics: Optional
Independent Hydraulic Reservoir: Standard
Cab Enclosure with heater: Optional
Foot and Hand Throttles: Standard
Full Instrumentation: Standard
Integral Access Plate (removable): Standard
Op. Restraint Bar w/Padded Armrests/Seat Belt: Standard
ROPS/FOPS Level II Overhead Guard: Standard
Sound Reduction Material: Standard
Suspension Seat - Mechanical: Optional
Work Lights - Front and Rear: Standard
Multi-Tach® Attachment Mounting: Standard
Anti-Vandalism Protection: Standard
Back-Up Alarm: Optional
Brake Control (auto/manual): Standard
Hydraglide™ System: Optional
Hydraloc™ System: Standard
Hydrostatic Drive - Pilot Controlled: Standard
Lift Arm Support Device: Standard
Power-A-Tach® Attachment Mounting: Optional
Self-Leveling Lift Action: Optional
Two-Speed Drive: Optional
Overall Operating Height - Fully Raised (mm): 158" (4013)
Height to Hinge Pin - Fully Raised (mm): 120.5" (3061)
Overall Height to top of ROPS (mm): 80" (2032)
Ground Clearance to Chassis (mm): 6.5" (165)
Overall Length with 66" Bucket (mm): 127" (3226)
Overall Length without Bucket (mm): 94" (2388)
Wheelbase (mm): 42" (1067)
Dump Reach at Full Height (mm): 22.5" (572)
Rollback at Ground Level: 26°
Dump Angle: 42°
Overall Width (mm): 66.5" (1689)
Overall Width - Narrow Offset Tire Option: 64.5" (1638)
Bucket Width (mm): 66" (1676)
Clearance Circle - Rear (mm): 58.5" (1486)
Clearance Circle - Front w/o Bucket (mm): 44.5" (1130)
Clearance Circle - Front w/Bucket (mm): 79" (2007)
Seat to Ground Height (mm): 39" (991)
Rollback at Full Height: 96°
Dump Height (mm): 91" (2311)
Departure Angle: 25°
Standard Tire Size: 10.00 x 16.5 HD
Model: 4TNV98C Tier IV
Gross Power (kW) @ 2,500 rpm: 69.3 (51.7)
Net Power (kW) @ 2,500 rpm: 68.4 hp (51)
Maximum Torque (Nm) @ 1,625 rpm: 173 ft.-lbs. (235)
Displacement (L): 202.6 cu.in. (3.3)
Auxiliary Hydraulics - Standard (L/min): 18.5 gpm (70)
High-Flow Hydraulics - Optional (L/min): 31.5 gpm (119)
Reservoir Capacity (L): 8 gal. (30.3)
Battery (CCA): 12-volt (950)
Starter (kW): 12-volt (3.0)
Rated Operating Capacity (kg): 1,900 lbs. (862)
With optional counterweight (kg): 2,110 lbs. (957)
Fuel Tank (L): 16.5 gal. (62.5)
Travel Speed - Maximum (km/hr): 12.5 mph (20.1)
Operating Weight - Approximate (kg): 6,854 lbs. (3109)