Rentals

RADIAL LIFT
Offers enhanced performance in excavating, grading and digging below grade applications. Due to the radial lift path, the maximum reach is greater at the middle of the lift height.

VERTICAL LIFT
Providing more reach at full lift height is optimal for applications that require loading and stacking at high heights. By keeping the load closer to the machine, lift capacities are increased over radial-lift models.

SINGLE PLANE LIFT ARM
Design features large diameter pins aligned in a single plane for best-in-class vertical and lateral strength and rigidity.

SINGLE PIN DESIGN
Provides superior durability in loading and pushing applications.

DURABLE BUILD
Up to 4.5'' (114 mm) width lift arm construction delivers superior strength and rigidity.

EXCELLENT FORWARD REACH
The Mustang radial lift skid steer loaders provide excellent forward reach at the middle of the lift path. This provides excellent performance for loading flatbed trucks, backfilling or dumping over a wall.

TRUE VERTICAL
The 4000V has a true vertical lift path. The 2700V NXT2 and 3300V NXT2 have a near vertical path.

X-TYPE
Upper-rear channel support welded to the top and between the load arms provides added rigidity without obstructing rear visibility.

- New cab safety restraint for safe serviceability access
- Selectable self-leveling lift action
- Factory installed electronic attachment control - 14-pin connector for operation of all attachments
- Operating capacity of 2,700 lbs. and 3,000 lbs. with optional counterweight kit
- Lift height of 130.3"
- 70.7-hp Yanmar Tier IV diesel engine
- Vertical-lift arm design
- Fast ground speeds up to 11.9 mph with two-speed option
- Operator-friendly Level II-certified ROPS/FOPS
- Optional cab provides a wide-view glass door and large side screens that offer excellent visibility to the bucket and front operating area
- Pressurized cab limits dirt and debris that enter the cab and reduces sound levels
- Auxiliary hydraulics of 23.5 gpm
- High-flow auxiliary hydraulics up to 35 gpm
- Drive motors utilize SAHR (spring-applied, hydraulic release) brakes as standard equipment
- Safety interlock system requires operator to be seated with restraint bar down prior to operation
- Tilt-up ROPS/FOPS for easy internal service access

Steering/Hydraulic Control Options
- Joystick Controls
- Hand/Foot Controls

Attachment Mounting System
- Optional hydraulic-powered Power-a-tach® mounting system
- The Multi-tach™ mounting system is Compatible with Most Attachments

Pilot Controls
Hand/Foot Controls Available: Optional
Joystick Controls Available: Optional

Engine
Engine Auto-Shutdown System: Standard
Engine Pre-heater: Standard
Turbocharged Engine: Standard

Hydraulics
Auxiliary Hydraulics: Standard
High-Flow Auxiliary Hydraulics: Optional

Operator Station
Adjustable Arm Rests/Control Tower: Standard
Air-Conditioning: Optional
High Back Adjustable Seat: Standard
Suspension Seat - Air Ride: Optional
Suspension Seat - Mechanical: Optional
Cab Enclosure with heater: Optional
Foot and Hand Throttles : Standard
Full Instrumentation: Standard
Heating: Optional
Horn: Standard
Integral Access Plate (removable): Standard
Op. Restraint Bar w/Padded Armrests/Seat Belt: Standard
ROPS/FOPS Level II Overhead Guard: Standard
Sound Reduction Material: Standard
Suspension Seat - Mechanical: Standard
Work Lights - Front and Rear: Standard

Performance
Multi-Tach® Attachment Mounting System: Standard
Power-A-Tach® Attachment Mounting System: Optional
Electronic Attachment Control - 14-Pin Connector: Optional
Anti-Vandalism Protection: Standard
Back-Up Alarm: Optional
Brake Control (auto/manual): Standard
Hydraglide™ System: Standard
Hydraloc™ System: Standard
Hydrostatic Drive - Servo: Standard
Lift Arm Support Device: Standard
Self-Leveling Lift Action: Optional
Two-Speed Drive: Optional

Dimensions
Overall Operating Height - Fully Raised (mm): 167.4" (4252)
Height to Hinge Pin - Fully Raised (mm): 130.3" (3310)
Overall Height to top of ROPS (mm): 81" (2057)
Ground Clearance to Chassis (mm): 8" (203)
Overall Length with Bucket (mm): 148" (3759)
Overall Length without Bucket (mm): 116.5" (2959)
Wheelbase (mm): 49.5" (1257)
Dump Reach at Full Height (mm): 32" (813)
Rollback at Ground Level: 29°
Dump Angle: 42°
Overall Width (mm): 69.5" (1661)
Bucket Width (mm): 70" (1778)
Clearance Circle - Rear (mm): 66.5" (1689)
Clearance Circle - Front w/o Bucket (mm): 56" (1422)
Clearance Circle - Front w/Bucket (mm): 90" (2286)
Seat to Ground Height (mm): 40" (1016)
Rollback at Full Height: 94°
Dump Height (mm): 100" (2540)
Departure Angle: 27°
Standard Tire Size: 12.00 x 16.5 HD

Engine
Make: Yanmar
Model: 4TNV98CT - Tier IV
Net Power (kW): 70.7 hp (52.7)
Gross Power (kW): 72 hp (53.7)
RPM for Optimal Power: 2500 rpm
Displacement (L): 202.6 cu.in. (3.3)
Maximum Torque (Nm) @ rpm: 217 ft.-lbs. (294) @ 1625

Hydraulics
Auxiliary Hydraulics - Standard (L/min): 23.5 gpm (89)
High-Flow Hydraulics - Optional (L/min): 35 gpm (132)
High Flow System Pressure (bar): 3,200 psi (220.6)
Reservoir Capacity (L): 10.5 gal. (40)

Capacities/Weight
Rated Operating Capacity (kg): 2700 lbs. (1225)
Tipping Load (kg): 5400 lbs. (2449)
Fuel Tank (L): 24.5 gal. (72.7)
Travel Speed - Maximum (km/hr): 7.4 mph (12)
Operating Weight - Approximate (kg): 8,150 lbs. (3697)